Hot Rolled Carbon Steel Sheet Manufacturer

No cutting corners on quality and weight

Hot Rolled Carbon Steel Sheet, also known as hot-rolled sheet, is made from slab as raw material and heated to produce strip steel by roughing and finishing mills. The hot steel strip from the last rolling mill of the finishing mill is cooled by laminar flow to the set temperature, and then coiled into a steel strip coil by a coiler. The cooled steel strip coil is then produced.Cut into the required size using a slitting machine.

Hot rolled steel plate products have excellent properties such as high strength, good toughness, easy processing and good weldability, and are widely used in manufacturing industries such as ships, automobiles, bridges, construction, machinery, pressure vessels, etc.

Hot Rolled Steel Type:

Coil/SheetHot Rolled Steel Surface:

Hold Rolled Steel Advantage

High strength: Hot rolled steel coils have strong cold deformation ability, making them have high strength and excellent impact toughness, suitable for applications that require bearing large loads and pressures.
Good plasticity: Hot rolled steel coils have good plasticity and can be processed into various complex shaped components through bending, stretching, stamping, and other processing methods.
Excellent surface quality: The surface of hot-rolled steel coil is smooth and flat, without obvious defects such as oxide scale and uneven size, with a beautiful appearance and easy subsequent processing and surface treatment.
Easy to weld: Hot rolled steel coils have good welding performance and can be firmly connected to other materials or components through welding processes.

Performance Parameter

Thickness	Yield strength (Mpa)	Tensile strength (Mpa)	Elongation rate A50mm%	180 degree bending test
>1.5-2.5	≤290	≥310	≥38	D=0a
>2.5-3.0	≤290	≥300	≥38	D=0a
>3.0-4.0	≤290	≥300	≥40	D=1/2a

Explanation: 

1. The tensile and bending tests listed in the table are applicable to longitudinal specimens
2. The tensile test uses specimens with L0=50 mm and b=25 mm
3. The sampling plan for the bending test should be carried out in accordance with sample No. 3 of JIS Z 2204, and the test method should be carried out in accordance with JIS Z 2248
4. The hardness test shall be conducted in accordance with JIS Z 2245
5. The target value for hardness HRB is 60 ± 8. The actual value provided in the warranty certificate is not a requirement for acceptance

About Zebra Steel，China Steel Manufacture，We have a factory of 23600m², 11 steel production lines, and export 3 million tons of steel annually to 86 countries.

HS code

72082500.Check tariffs before ordering from China.

How about the MOQ? If my first order qty is small, will you accept?

We would like to do our best to support your trial order qty, so even 1 pc or 1 kg is ok to start cooperation; because we have confidence to move on second order with your esteemed company.

2) 100% Irrevocable L/C at sight;If you need any other terms, pls feel free to contact us too, we will try our best.

Yes, we would like to supply the samples before order; if the samples from stock, it will be free; if the samples from newproduction, we will charge some reasonable cost, but this amount will be deducted from your first order invoice.